We're sorry. To view this site, you need to have the Flash plug-in. You either do not have it or have an older version. Please download it here for free.
 

 

Laskelmat-BT

Calculation software and unifilar schemes drawing

Laskelmat-BT it is a software designed to assist to the calculation of cables and several electrical parameters in a low tension electrical installation. From the suggested values, the user select the cables and thermo-magnetic interruptors who finally decide to use, and then, recalculate all the electrical parameters and perform the bill of materials. The program also draw the unifilar diagram of the electrical installation in AutoCad.

What can do Laskelmat.BT for you?
- Laskelmat -BT assists the designer in electrical installations calculation, automating those repetitive tasks that are not part of the special characteristics of each project.
- Laskelmat -BT combines the experience of the designer with the computing power.

FACILITIES FOR DATA ENTRY AND EDITING.
It has forms that will facilitate the entry and editing of data, help buttons to guide you in using the program. In addition, the program validates the data entered detecting and identifying errors.
CALCULATION OF ELECTRICAL PARAMETERS.
The calculated parameters are:
- Active and reactive power
- Power factor
- Load current and admissible current ( Iz )
- Cross section of cables in order to meet the criteria of admissible current and minimum cross section.
- Specific energy of the line
- Voltage drop
- Real voltage (considering the drop at rated power )
- Short-circuit maximum and minimum currents
SELECTION OF PROTECTION .
Calculate the parameters of the thermo- magnetic circuit breakers in order to protect the line against overload and short circuit (maximum and minimum) and the rated current of the differential circuit breakers.
BILL OF MATERIALS FOR CABLES AND CIRCUIT BRAKERS .
Resume on 2 separate the bill of materials for cables and circuit breakers.
DRAW THE UNIFILAR SCHEMES IN AUTOCAD.
The program draw the unifilar schemes in AutoCAD 2013, by using a sheet dedicated to it, allowing you to draw the calculated installation schemes, or use this sheet to draw unifilar schemes without using the calculation tool.

What advantages does Laskelmat -BT have, compared to other calculation programs of electrical installation?
- LASKELMAT-BT STRENGTH LIES IN ITS SIMPLICITY
Calculation programs available on the market today have a high degree of automation of calculation, which leaves very little freedom of the designer to meka choises. Given the large amount of input data and settings you have , those programs results non useful for small and medium size projects , so that the designer end up using these programs for very specific cases. Laskelmat-BT is designed to really assist the designer by automating only those calculations that do not limit the design . It's simple to use so it almost do not requires investing time in learning to use it.

- LASKELMAT-BT IS ADAPTED TO THE DESIGNERS WORK METHODOLOGY.
Calculation programs currently available on the market require that the designer get adapted to the program. With the Laskelmat -BT, you works as the same way you did it with your own Excel semi programated spreadsheet (usually spreadsheets designed exclusively for a particular project with formulas inserted into cells).

- LASKELMAT-BT DRAW DIRECTLY IN AUTOCAD .
With the other programs you have to draw the scheme in a separate suite, and then (in the best case ) import into a CAD program and adjust them to the way you draw. Laskelmat-BT draws the schemes directly into a base.dwg file in AutoCad, so that the you have full control over the drawn .

- PRESENTATION OF DATA AND RESULTS.
The entries and the results obtained by Laskelmat-BT can be presented directly to a third party in a summary , clear and concise way . Who receives the results do not need to have any software installed to view and work with the estimates obtained by the, rather than MS Excel.

- LASKELMAT-BT CAN BE USED FOR YOUR ASSISTANT EMPLOYEE.
Given its simplicity and its friendly interface, Laskelmat -BT can be used by an assistant employee with basic knowledge of electrical installations and basic knowledge of MS Excel . This provides an increase of your employee productivity.

We invite you to see the video tutorial of Laskelmat-BT 3.0.